25 mm |
|
Size of Morse Taper |
MT-3 |
Spindle Stroke |
200 mm |
No. of Spindle Speed |
8 |
Range of Spindle Speed |
80 / 1800 Rpm |
Spindle Drive Motor |
1 HP 1440 Rpm |
Arm Elevating Motor |
0.5 HP 1440 Rpm |
Spindle Drive V-Belt |
B-45 |
Arm Elevating V-Belt |
A-19 |
Working Table [L X W X H] |
250 x 250 x200 mm |
Drilling Radius Max. / Min. |
720 / 365 mm |
Distance from Column to Spindle Max. / Min. |
655 x 300 mm |
Max. Drill Head Travel |
355 mm |
Distance from Base to Spindle Max. / Min |
880 / 175 mm |
Diameter of Column |
130 mm |
Swivel of Arm L / R Side |
90 |
Base Plate [ L x W x H ] |
1005 x 605 x 125 mm |
Working Surface |
490 x 620 mm |
No. of Slot Size |
3 / 16 mm |
Overall Height Wooden Case |
1525 mm |
Size |
1000 x 700 x 1600 mm |
STANDARDACCESSORIES:
MotorPulley, 2 Nos. Drift Key.
OPTIONALACCESSORIES: Electricmotor, Box Table, Control panel, V-belt & Coolant Pump with Tank &Fitting.
![]() |
SIDDHAPURA ENGINEERING WORKS
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |